Bearings are commonly used in grease, such as calcium based smooth grease, sodium based smooth skid, calcium and sodium base smooth skid, lithium based smooth skid, aluminum based smooth skid, and molybdenum disulfide smooth skid. The amount of smooth grease filled in the bearing is suitable for filling in the inner space of the bearing.

高速应减少到1/3，润滑脂过多会使温度升高。江苏NTN轴承在一些特殊的固体润滑下应用的前提是少量固体润滑剂参与润滑脂，如参加3～5%的二硫化钼可以减少磨损，提高抗压力和热的能力，关于高温、优雅。

High speed should be reduced to 1/3. Too much grease will raise the temperature. Jiangsu NTN bearings in some special solid lubrication under the premise of the premise is a small number of solid lubricants to participate in grease, such as 3 to 5% of molybdenum disulfide can reduce wear and tear, improve the ability to resist pressure and heat, about high temperature, elegance.

CE、高真空、耐腐蚀、耐辐射、极低温等，江苏NTN轴承采用固体光在工程塑料或粉末冶金材料中，滑动剂可制成自光滑轴承零件。例如，平滑剂通过粘结剂与滚道、支架和滚动体结合，形成光滑的膜。具有一定的减摩耐磨效果。

CE, high vacuum, corrosion resistance, radiation resistance, extremely low temperature, and so on, Jiangsu NTN bearings use solid light in engineering plastics or powder metallurgy materials, sliding agents can be made of self smooth bearing parts. For example, a smoothing agent forms a smooth film by binding with a raceway, a bracket and a rolling element. It has a certain antifriction and wear-resistant effect.

（1），坚持轴承及其周围的清洁。

(1) adhere to the cleaning of the bearing and its surrounding.

即使是眼睛看不见的灰尘也会给江苏NTN轴承带来不良影响。所以，我们必须坚持清洁周围，使灰尘不侵犯轴承。

Even invisible dust can cause adverse effects on Jiangsu NTN bearings. Therefore, we must insist on cleaning around, so that dust does not infringe on bearings.

（2）足够的小心谨慎。

(2) enough prudence.

在应用中，承受轴承的剧烈冲击会引起疤痕和压痕，并成为干扰的原因。在张力下，裂纹和断裂会发生，所以我们必须注意它们。

In application, bearing severe impact will cause scar and indentation, and become the cause of interference. Under tension, cracks and fractures will occur, so we must pay attention to them.

（3）使用适当的手法。

(3) use the appropriate techniques.

为了防止现有事物的替代，有必要使用适当的东西。

In order to prevent the replacement of existing things, it is necessary to use the right things.

（4）注意轴承的腐蚀。

(4) pay attention to the corrosion of the bearing.

当运行江苏NTN轴承时，汗水会在手上生锈。注意使用干净的手，最好戴手套。

When running Jiangsu NTN bearings, sweat will rust on the hands. Pay attention to the use of clean hands, it is best to wear gloves.

（5）压紧轴承，该材料稳定可靠，不会损坏刚性板和轴承。压力机由机械或液压机手动推压。

(5) press the bearing, the material is stable and reliable, and will not damage the rigid plate and bearing. The press is pushed manually by a machine or a hydraulic press.

注意，江苏NTN轴承压力机的输出点应该在轴的中部，并且不应该偏压。铁姆肯轴承的应用。

Note that the output point of Jiangsu NTN bearing press should be in the middle of the shaft and should not be biased. The application of the Timken bearing.